|
|
|
Welding machines for plumbers and constructors |
|
WIDOS welding machine MINIPLAST 2 |
|
|
The Miniplast/2 is a welding
machine for heating element butt welding of PE,
PP and PVDF pipes and fittings from OD 20 to OD
110 mm. The basic machine has two large
aluminium basic clamping tools which are
swivelling up to 15° on each side for the
fabrication of segmented bends. By screwing in 4
small reduction inserts, a double clamping is
obtained at the smaller diameters. For fittings
with short legs, a small fitting clamping tool
is available.
Due to the special
construction of the pressure build-up device,
the machine can be fixed directly at very short
pipe ends on walls and sheets. Due to its light
and compact construction as well as due to the
horizontal and vertical motion, the machine is
ideally suited for use in the pipeline system
and for installation work. In the case of
stationary use, the machine can be fixed in the
vice or at the table support.
The light and compact
manual planer is operated by means of a ratchet.
The electronically
controlled heating element in accordance with
DVS 2208 (220 V/600 W) has a working diameter of
140 mm, a anti-stick coating and control lamps
for system and interval checking.
For the safe storage of
the planer and the heating element, a
heat-protected box is available. The sheet steel
carrying case serves for the transport and the
protected storage of the complete Miniplast/2.
|
 |
|
WIDOS
welding machine MAXIPLAST |
|
|
Mobile welding machine for
the heating element butt welding of pipes and
fittings made out of polyolefines of the
dimensions OD 50 - 160. The solid basic machine
has two aluminium clamping tools swivelling
eacht to 15° for the fabrication of segmented
bends. By using different reducer inserts of a
small, large or extra-large type, all clampming
options can be realized. For fittings with
extremely short legs, solid steel clamping tools
in small version are available.
The solid base with
ball-bearing guidings, spindle and power input
damped by springs enables quick movements for
short change-over times as well as a soft
pressure build-up. Due to the compact and solid
design, the machine is ideally suitable for the
usage at places with difficult access under on
site conditions. For the stationary usage, an
additional basement is available which enables
to use the machine as table set.
The solid planer (230
V/400W) with electric drive has been optimized
with respect to a most simple handling. The
electronically controlled heating element (230
V/800 W) has an anti-stick coating of high
quality, an exterman mains switch and control
lamps for an interval checking. The exact
temperature control meets all requirements of
DVS 2208.
For the safe sotrage of
heating element and planer, a solid and easily
portable heat-protected box is available. The
complete machine can be transported and stored
in a transport case with additional compartments
for all reduction inserts. Also available:
versions in 110 V, °F or with lbs-force-display.
|
|
|
WIDOS
welding machine 2500 |
|
|
Handy and mobile plastic
welding machine for PE, PP, PVDF and PB for the
use in the workshop and on the building site.
Particularly suitable for sanitary installations
and wastepipes. The diameters are selectable
from OD 50 to OD 160 mm, OD 50 to OD 250 mm and
OD 50 to OD 315 mm.
Machine with electrically
operated planer, electronical heating element,
basic clamping tool divided into two parts
(except for OD 160 mm), each side swivelling up
to 15° with clamping inserts and pipe support as
well as a transport and mounting crate for a
safe, clean and protected storage.
If desired there is a
combined butt/socket welding machine available
(please see below). Versions also in 110 V, °^F
or with lbs-force display. |
 |
|
WIDOS welding machine 2500
combi |
|
|
Welding machine for heating
element socket welding of PE, PP and PVDF pipes
and fittings from OD 20 up to OD 125 and for the
heating element butt welding of PE, PP and PVDF
tubes and fittings from OD 50 up to OD 160 with
SDR 7,25. Complete with welding pressure setting
and scale, planer with electrical chain drive in
a closed aluminium housing and external chip
removal. The machine carriage works with a
linear prismatic guideway on a solid basic
frame. |
 |
|
